Ribbon Blender is a very fast and 100% efficient mixer to blend practically any dry powders, from food products to chemicals. Even liquids in small amount can be mixed in a very efficient way.

Ribbon blenders consist of U shaped horizontal trough and specially fabricated ribbon agitator.

Ribbon agitator is formed of a set of inner and outer blades mounted on a solid shaft. The outer blades move the material in one direction while the inner blades move the material in exactly opposite direction.

The ribbon blender is carefully designed to ensure through mixing with required coefficient of variation (CV).

Temperature rise is also minimal which is important when we consider vitamin mixing.

Discharge gate  can be manual or pneumatically operated for direct filling of bags or for dumping in to storage bin.

Blenders can be constructed in Mild Steel (MS) or Stainless steel (SS) depending upon the material to be blended.

The blender normally operates between 20 rpm to 40 rpm depending upon the material characteristics and mixing time required. Motor rpm is normally 1500 and reduction is done through set of spur gears or through gearbox.

Fluid coupling can be also used as a optional item. They are useful to start the mixer on load in case of sudden electricity failure.

The alternate mixer is of paddle design. The paddles are positioned to move materials in opposing lateral directions and radically. The paddle mixer is normally used where friable materials are being blended or dry powders are to be mixed.

Ribbon and paddle designs are available in various capacities according to the customer’s individual requirement.